Excitor Motors

Excitor Vibratory Motors - THE COMPLETE RANGE OF VIBRATORY MOTORS

Excitor vibratory motors is not a new comer to Industry, having built vibratory motors locally in South Africa for over 15 years, with hundreds of motors operating in the field, with excellent performances on various applications, such as Vibrating Feeders, Vibrating Screens, Vibrating Conveyors, Shake Outs, Vibrating Tables, Bin Discharges, Brick Making Machines or other Vibrating Equipment to maintain the flow of bulk materials from bins, silos, steel chutes and in the use of compaction.

A wide range of standard EXCITOR motors are available as well as special designs to accept other mounting holes. EXCITOR vibrators is designed to offer long life, maintenance free operation, in the use of high load rated bearings to ensure a high acceptable B10 life. Large diameter shafts are used where the eccentric masses are located t eliminate any stress or shaft deflection during during operation.

Excitor Vibrators are housed in specially designed robust castings of S.G. iron up to the 200 frame, larger motors are housed in fabricated and welded barrel which is stress relieved prior to machining.

 

Lubrication of EXCITOR Vibrator has received special attention from the designers and research and development resulted in the use of a SPECIALLY SELECTED GREASE which is pre packed into the bearings. This superb multi purpose grease results in economic benefits such as cost saving, reduced work rates and most important, the reduction of error by the use of the incorrect grease. SPECIALLY SELECTED GREASE is water resistant, can repel water and act as a seal for bearings exposed to hard working conditions. With a Dropping point of 260°c in application in excess of 200°c, the product has excellent pumpability in addition to enduring shock loadings. The mechanical stability of the grease ensures the grease will not soften and run out. Extremely quiet running.

Excitor standard vibratory motors range from 100 watts to 22kw units. These are available in 2,4,6 and 8 pole either 380 or 525 volt 3 phase 50hz. as well as 220/380 volt single phase.



Excitor will and has produced non standard motors with base bolt holes to suit the applications, these vibratory motors are normally a fabrication request.